https://help.ubuntu.com/community/ManyButtonsMouseHowto

sudo apt-get install imwheel

Button 10 ist die Daumentaste.

/etc/X11/imwheel/startup.conf:

IMWHEEL_START=1
IMWHEEL_PARAMS='-b "0 0 0 0 0 0 10"'

~/.imwheelrc:

".*"  
None,		ExtBt7,   Alt_L|F9

Und schließlich unter Einstellungen / Tastatur / Tastenkombinationen / Fenster / Fenster verkleinern
Alt + F9 einstellen (sollte aber auch Default sein).

xorg-xev, xbindkeys und xdotool installieren:

pacman -S xbindkeys xdotool xorg-xev

mit xev Button Nummer herausfinden.

Maustasten mit xbindkeys auf Tastendrücke legen: ~./xbindkeysrc:

# Button 10 sends ALT+F9
"xdotool key alt+F9"
b:10

xbindkeys automatisch beim Einloggen starten: ~/.xprofile:

xbindkeys &

In Desktop-Einstellungen ALT-F9 auf gewünschte Funktion, z.B. Fenster minimieren setzen.

Per 'xset'. Z.B.: xset m 5/4 0

Das ganze dann als Startup definieren,

#cat ~/.config/autostart/mouse.desktop

[Desktop Entry]
Name=Set mouse sensitivity
Exec=xset m 5/4 0
Type=Application
Comment=Use xset to set mouse params
Comment[en_US]=Use xset to set mouse params
Comment[de_DE]=Benutzt xset um die Maus-Geschwindigkeit einzustellen

Siehe auch: http://www.pontikis.net/blog/fix-mouse-sensitivity-ubuntu

https://github.com/arduino/Arduino/pull/4517
(http://downloads.arduino.cc/javaide/pull_requests/arduino-PR-4517-BUILD-514-linuxarm.tar.xz)
Einfach entpacken und ausführen.

$ sudo hcitool scan
Scanning …
00:02:C7:7D:F5:17 BlueGPS 7DF517
$ sudo rfcomm bind /dev/rfcomm0 00:02:C7:7D:F5:17 1
$ ls -l /dev/rfcomm0
crw-rw—- 1 root dialout 216, 0 2008-12-14 23:15 /dev/rfcomm0


Von https://unix.stackexchange.com/questions/219533/how-to-format-720k-fat-ie-ms-dos-floppy-on-linux-using-usb-floppy-drive und https://fitzcarraldoblog.wordpress.com/2017/01/17/using-an-external-usb-3-5-inch-floppy-disk-drive-in-linux/

$ sudo ufiformat -f 720 -v /dev/xxx

Danach mit mkfs.msdos Filesystem erstellen oder per dd beschreiben.

$ sudo mkfs.msdos -I /dev/xxx

#                                                                   #
# Command line                                                      # Bitbucket (prefered)
#                                                                   #


====================================== Create a new branch =====================================================

# Create and checkout branch                                        Bitbucket: Create the branch in Bitbucket
git checkout -b <branch>
                                                                    # Fetch the new branch and check it out
# Push (empty) branch to the remote repository                      git fetch
git push -u origin <branch>                                         git checkout LSAS-0815_CoolFeature
 
# Do the work: edit, add, ...

# Commit the branch
git commit -m "Insert commit message here"

# Push branch to the remote repository
# ***********************************************************
# Note: From Pro Git book: "In general the way to get the best of both worlds is to rebase local changes 
# you’ve made but haven’t shared yet before you push them in order to clean up your story, but never rebase 
# anything you’ve pushed somewhere.
#
# => so better first commit locally until finished, then rebase and then push to origin.
# ***********************************************************
git push    # Specify upstream if not already done above: git push -u origin <branch>




====================================== Rebase ==================================================================

# Update master copy
git checkout master
git pull

# go to branch which should be merged to master and make sure that remote is equal with your copy
git checkout <branch>
git pull    # only if branch is already pushed to origin

# Start rebase
git rebase master

# solve conflicts with an editor e.g foo.cxx has a conflict
kate foo.cxx # remove conflict
git add foo.cxx

# continue rebasing
git rebase --continue

# if there are no other conflicts to solve, push your branch to remote otherwise solve conflicts
git push --force


====================================== Merge the branch with master ============================================

git checkout master                                                 Bitbucket: Create pull request
git merge <branch>                                                  Bitbucket: Merge
git push                                                            Bitbucket: Delete <branch>

See:
https://www.johannes-bauer.com/linux/luksipc/
https://johndoe31415.github.io/luksipc/
https://github.com/johndoe31415/luksipc

# Find the right partition
lsblk -o name,fstype,size

nvme0n1                477G
├─nvme0n1p1 vfat       512M  <== boot
├─nvme0n1p2 ext4     437,4G  <== root
└─nvme0n1p3 swap      39,1G

# Set boot and root partition names according to above output!
BOOTPART=/dev/nvme0n1p1
ROOTPART=/dev/nvme0n1p2

# Shrink root filesystem (NOT the partition)
BLKCNT=$(sudo tune2fs -l $ROOTPART | grep "Block count:" | awk '{print $3}')
BLKCNT_SHRINK=$(($BLKCNT - 32768))
echo "Blockcount original: $BLKCNT, shrinked: $BLKCNT_SHRINK"

e2fsck -f $ROOTPART
sudo resize2fs $ROOTPART $BLKCNT_SHRINK

# Encrypt
wget https://github.com/johndoe31415/luksipc/archive/master.zip
unzip master.zip
cd luksipc-master
make
sudo ./luksipc -d $ROOTPART

# Add keyphrase
sudo cryptsetup luksAddKey $ROOTPART --key-file=/root/initial_keyfile.bin
# Let’s check this worked (slot 0 and 1 are populated)
cryptsetup luksDump $ROOTPART
# Let’s scrub the initial keyslot so the initial keyfile becomes useless
cryptsetup luksKillSlot $ROOTPART 0
# And check again (slot 1 is empty)
cryptsetup luksDump $ROOTPART
# resize the filesystem to its original size
sudo cryptsetup luksOpen $ROOTPART newcryptofs
resize2fs /dev/mapper/newcryptofs


# Make the system boot from the encrypted filesystem
sudo mount /dev/mapper/newcryptofs /mnt
sudo mount $BOOTPART /mnt/boot
  

# Edit /etc/mkinitcpio.conf
sudo nano /mnt/etc/mkinitcpio.conf
# change MODULES=() to
MODULES=(nvidia_uvm nvidia_drm)
# set HOOKS to 
HOOKS=(base systemd autodetect keyboard keymap sd-vconsole modconf block sd-encrypt filesystems fsck)


# Set the content of the file /boot/loader/loader.conf:
echo -e "default arch\ntimeout 5\nconsole-mode max\n" | sudo dd of=/mnt/boot/loader/loader.conf
# and /boot/loader/entries/arch.conf:
echo -e "title Arch Linux\nlinux /vmlinuz-linux\ninitrd /intel-ucode.img\ninitrd /initramfs-linux.img\noptions rd.luks.name=$(lsblk $ROOTPART -o UUID -n -d)=cryptroot root=/dev/mapper/cryptroot nvidia-drm.modeset=1" | sudo dd of=/mnt/boot/loader/entries/arch.conf

sudo chroot /mnt
mount -t proc proc /proc
mount -t sysfs sys /sys
mount -t devtmpfs udev /dev

mkinitcpio -p linux
exit  # leave chroot

# reboot